New Braunfels is one of the fastest-growing communities in Texas — up roughly 35% since 2020 — and a lot of that growth is happening faster than city water lines can reach. We drill wells, install pumps, and size pressure tanks correctly for Comal County's Trinity and Edwards Aquifer zones, from a bare acreage lot to a full system replacement on an existing home.
Tell us about your property and we'll call you back the same business day.
We look at your property, pull nearby well logs when available, and give you a real number before you commit to anything.
Drilling and pump sizing matched to the Trinity and Edwards Aquifer zones, not a generic one-size system.
We know the county permitting process and the well-driller's report requirements for Comal County properties.
You'll see drilling, casing, and equipment costs broken out before work starts — no vague lump-sum guessing.
Comal County has been one of the fastest-growing counties in Texas for several years running, and New Braunfels has grown roughly 35% since 2020 alone. A lot of that growth is happening on acreage and semi-rural lots outside city utility boundaries — in Fischer, Bulverde, Spring Branch, and the outskirts of Canyon Lake — where a private water well isn't optional, it's the only water source available.
That means well drilling and pump work here isn't a niche service, it's basic infrastructure for a large and growing share of new construction in the county. Getting the well depth, casing, and pump sized correctly the first time — matched to the actual aquifer zone under a given lot rather than a generic assumption — is what keeps a new homeowner from dealing with low pressure or a failed pump eighteen months after move-in.
Drilling the hole is half the job. A lot of the well complaints we see on existing properties — weak pressure, a pump that short-cycles, water hammer in the pipes — trace back to a pressure tank or pump that was undersized for the home, not the well itself. Comal County's water is also hard, which is harder on undersized equipment over time.
New well drilling, casing, and submersible pump installation sized to your property and aquifer zone.
Learn more →Pressure tanks, booster pumps, and storage tank systems that hold steady pressure and protect your well pump.
Learn more →Exterior board & batten siding and interior accent walls, a common pairing on the same new-build and remodel jobs.
Learn more →Most of our calls start with a bare lot or a failing existing well. We pull nearby well-driller reports to estimate depth and aquifer zone before we ever bring equipment out, then handle drilling, casing, and a properly sized submersible pump system — plus the pressure tank that keeps the whole system from short-cycling.
| Project Type | Typical Installed Cost | Best For |
|---|---|---|
| Standard residential well (300–450 ft) w/ submersible pump | $8,500 – $15,000 | New builds on standard-size lots |
| Deeper well (450–600+ ft) into Trinity Aquifer | $15,000 – $22,000+ | Western Comal County acreage, western Bulverde/Spring Branch |
| Pressure tank & booster pump system (existing well) | $1,200 – $3,800 | Fixing low pressure or a short-cycling pump |
| Board & batten siding or accent wall (per project) | $2,500 – $9,500 | Exterior refresh or interior feature wall |
We review your property, pull nearby well-driller reports, and talk through depth and equipment options.
We handle the Comal County permitting requirements and get equipment access sorted before drilling day.
An itemized quote covering drilling, casing, and equipment — no surprise change orders.
Drilling and casing, then pump and pressure tank installation — typically 1 to 3 days depending on depth.
We test flow and pressure at the tap with you before calling the job complete.
Based in New Braunfels and serving the surrounding Comal County communities, including:
Most residential wells in Comal County run $8,500 to $22,000 all-in, including drilling, casing, and a standard submersible pump. Final pricing depends on depth, aquifer zone, and pump sizing — confirmed with a free on-site estimate.
Most wells in and around New Braunfels run 300 to 600 feet depending on which aquifer zone the property sits over and nearby well logs, though some Trinity Aquifer wells on the western side of Comal County go deeper.
A well pump alone can't hold consistent water pressure at the tap — a properly sized pressure tank and, on larger homes, a booster pump keep pressure steady and reduce how often the well pump cycles on and off, which extends its life.
Both — we install new wells and pump systems on undeveloped lots and new builds, and we diagnose and repair failing pumps, pressure tanks, and low-pressure complaints on existing wells.
Yes — we also install board and batten siding and interior accent walls, a common add-on for the same new-construction and remodel projects we do well work on in the New Braunfels area.
Same-day callback, no obligation. Serving New Braunfels, TX and Comal County.